Structural modular joints JOINTEC GR
Structural modular joints JOINTEC GR
JOINTEC GR aluminium structural expansion joints are composed of twin metal profiles that allow rotational movement between the metal flanges and the central synthetic rubber insert. Designed to bear loads of large scale buildings or building compounds, they can be installed in the interstitial space between two sections of a building or between two bays. This technical joint links these interspaces, moving three-dimensionally to accommodate a building’s structural and material settlement. The structural bays defined by this profile should be further subdivided with smaller scale movement / expansion joints, chosen according to the expected use and flooring type.
How to install joints JOINTEC GR
INSTALLATION: • Slide the central metal insert into the side flanges. • Snap the synthetic rubber insert into the profile before aligning and positioning the expansion joint on site. • If necessary, protect the rubber insert with masking tape. • Anchor the side flanges with appropriate screws, 30cm on center, on both sides of the profile. • Lay mortar bed over the side flanges, and install the tiles as normal.
-
Jointec GR-A in Natural Aluminum + Resinprene Insert
Profile Width = 68mm, bridges a 46mm gap. This extruded aluminium profile offers good resistance to chemical and mechanical stress and wear. The 37mm - wide rubber insert guarantees high elasticity. Brass profiles are recommended for outdoor use. Ribbed or smooth versions of the rubber insert are available upon request.
Aluminum / Natural
BxH (mm) Art. Color 20 GR 200 AN23 Embossed Cement Grey 50 GR 500 AN23 Embossed Cement Grey 70 GR 700 AN23 Embossed Cement Grey 20 GR 200 AN51 Black 50 GR 500 AN51 Black 70 GR 700 AN51 Black
Related products
Select items and add them to the quotation list
Select the product to request a quote
| Article | Material | Finishing | Color | Installazione | BxH (mm) | |
|---|---|---|---|---|---|---|
|
|